Driving

Command stations, boosters and programmers for digital loco control.

The LoDi-Rektor makes the track signal and drives the boosters over the LoDi bus, so a layout can be split into sections without replacing the command station. More in the documentation

Command station: generate driving commands

Turns the PC’s commands into the track signal.

LoDi-Rektor

Network command station: generates the track signal in DCC, mfx® and Motorola and drives the boosters over the LoDi bus.

Needs: LoDi-Booster

from €156.50

Choose options

Booster: power for the track

Choose a suitable booster. These models are alternatives; choose by scale and current requirements.

LoDi-Booster

Dual booster with 2 × 2.3 A, RailCom-capable, with an adjustable power supply.

Needs: LoDi-Rektor

€294.00

LoDi-Booster 10A

10 A continuous for large scales, RailCom-capable, power supply included.

Needs: LoDi-Rektor

€419.00

LoDi-Booster 10A+

Up to 14.99 A continuous, maximum current set through the LoDi-ProgrammerFX.

Needs: LoDi-Rektor

€335.00

Optional: manage reverse loops

Only if the layout has a reverse loop.

LoDi-KSM

Reverse loop module, automatic or decoder-driven, RailCom-capable, for Z to G scale.

€52.50

LoDi-KSM-P

Reverse loop module for large scales, with no contact track and independent of the data format.

€65.00

Optional: configure loco decoders

A separate programmer to read and change decoder settings.

LoDi-CV-Progammer

Programmer for DCC and mfx®, with its own booster up to 1 A, powered over USB-C.

€167.00