Digital control for your model railway

Driving

The LoDi-Rektor makes the track signal and drives the boosters over the LoDi bus, so a layout can be split into sections without replacing the command station.

The system runs gauge Z to G — the difference is power alone. How many boosters you need follows from the number of separate power districts, not from floor area.

• Interface on the networkOne per layout

  LoDi-RektorNetwork command station: generates the track signal in DCC, mfx® and Motorola and drives the boosters over the LoDi bus.
• LoDi-CV-ProgammerProgrammer for DCC and mfx®, with its own booster up to 1 A, powered over USB-C.
• LoDi-BoosterDual booster with 2 × 2.3 A, RailCom-capable, with an adjustable power supply.2 power districts · 2.3 A each
• LoDi-Booster 10A10 A continuous for large scales, RailCom-capable, power supply included.Gauge 0 and up · 1 district at 10 A
• LoDi-Booster 10A+Up to 14.99 A continuous, maximum current set through the LoDi-ProgrammerFX.Gauge 0 and up · up to 14.99 A, adjustable
• LoDi-KSMReverse loop module, automatic or decoder-driven, RailCom-capable, for Z to G scale.Gauge Z to G
• LoDi-KSM-PReverse loop module for large scales, with no contact track and independent of the data format.Large scales

Switching SC system

The LoDi-Shift-Commander sits on the network and the Operator modules are daisy-chained with patch cables — up to 480 switching channels on one Shift-Commander, with no load on the track signal.

• Interface on the networkOne per layout

  LoDi-Shift-CommanderNetwork interface for the SC switching bus, up to 480 switching channels.
• LoDi-Operator 4-WD-DCSwitching decoder for anything running on direct current.
• LoDI-Operator 4-WD-ACTurnout decoder for solenoid and motor drives on alternating current.
• LoDi-Operator 16-SD-FLSwitching decoder with 16 outputs of 150 mA each for signals, lamps, LEDs and effects.
• LoDi-Operator 16-SD-FL-1KSwitching decoder with 16 outputs for signals, lamps, LEDs and effects, 1k version.
• LoDi-Light-Operator 4-C-LEDRoom lighting on the SC bus: four channels, 1024 dimming steps at 100 Hz.
• LoDi-SC-BoosterCompact bus booster for long patch-cable chains on the SC bus.

Detection

The LoDi-S88-Commander LX is the network interface; the detectors hang off the s88 or S88.2 bus and deliver occupancy and RailCom data to the control software.

• Interface on the networkOne per layout

  LoDi-s88-Commander LXNetwork interface for the s88 and S88.2 feedback bus, configured through its own web UI.
• LoDi-8-GBM v2RailCom-capable occupancy detector with eight sections for two-rail track.
• LoDi-8-GBM-P v2Occupancy detector with its own measuring current, for layouts without a common return.
• LoDi-RM-16+ v2Feedback module with 16 inputs for three-rail track.
• LoDi-s88-BoosterBus booster for long s88 runs and many modules.
• LoDi-S88 AdapterBrings existing older s88 modules into the feedback system.

Switching DCC

These decoders need no interface: they sit directly on the track signal and work with any DCC command station, including one from another maker.

• LoDi-83-ACTurnout decoder for alternating-current drives, straight off the DCC track signal.
• LoDi-84Bistable relays for switching external loads or cutting track sections.
• LoDi-Mono-Servo-DCCSmall servo decoder for single servos.
• The LoDi-Mono-Servo-DCC-HSmall servo decoder for single servos, with frog polarisation.
• The LoDi-Dual-Servo-DCCServo decoder for two servos, driven over DCC.
• The LoDi-Dual-Servo-DCC-HServo decoder for two servos, with frog polarisation.
• Servo Remote ControlSets the servos’ end positions right at the layout — for the Dual servo models only.