Driving
Documentation

Hardware

Driving

The Driving section covers every device that generates the track signal and brings the necessary power to the layout — from the command station through the boosters to the reverse loop module.

For each device you will find the description, the manual as a PDF and videos.

In this section

  • LoDi-Con

    Wi-Fi handheld controller for the whole LoDi system — third-party command stations included.

  • LoDi-Rektor

    The network command station of the LoDi system: generates the track signal in DCC, mfx® and Motorola and drives the boosters over the LoDi bus.

  • LoDi-CV-Programmer

    Programmer for DCC and mfx® with a built-in booster up to 1 ampere, powered over USB-C PD.

  • LoDi-Booster

    Dual booster with 2 × 2.3 amperes, RailCom capable, with an adjustable power supply — it puts the track voltage on the layout.

  • LoDi-Booster 10A

    Booster with 10 amperes continuous for large scales, RailCom capable, power supply included.

  • LoDi-Booster 10A+

    Up to 14.99 amperes continuous, maximum current adjustable through the LoDi-ProgrammerFX.

  • LoDi-KSM

    Reverse loop module with automatic or manual control, RailCom capable, for scales Z to G.